よくある質問

Q Is a curved projection screen better than a flat one? I like the way it looks but what about performance?
A

In addition to its looks, a curved projection screen plays a valuable role in today’s home theaters. Residential theaters are more commonly featuring the same wide “Cinemascope” screen format as one would see in a movie theater. This wider format looks

Q How do you decode EPV® model numbers?
A

Each Elite Prime Vision® model number starts with the product series name. Followed by screen size (diagonal), screen aspect ratio, screen material and product

Q What are the main factors (i.e. cost and features) that I should use in comparing the various projection screen brands?
A

Although there are many manufacturers that cover a variety of retail and integrator sales channels, product quality, features and pricing are still the driving criteria for increased projection screen sales.

Q I noticed that the materials on non-tensioned projection screens may curl at the sides while tensioned materials seem to flatter. What causes this curling?
A

Curling is commonly caused when a non-tensioned screen is in a room temperature below 65°F, but will maintain a relative state of flatness between 65-85°F (18.33°C-29.44°C). Curling does not distort the image, but for those interested in reducing side curls, Elite Prime Vision® offers “FG” or a fiberglass-backed material that greatly reduces curling.

Q Can I increase the Top Black Border on my screen?
A

Yes, but it should be done by a qualified installer following the detailed instructions from the screen’s manual and only on those models which specify extra black drop (i.e. E-20). In all other cases your screen’s top black border has been set to deploy to its full extent.

Q Do any of the trim pieces from the Aerie Tension Series screen come off to allow installation if there is no access above the screen?
A

Yes, the Aerie Tension Series screen can be installed from above or below.

Q What preventative maintenance does Elite Prime Vision® recommend for electric screens?
A

We strongly recommend using either a standard surge protector or a power conditioner on all electric projection screens.

Q The synchronized motors seem to be really slow. Why would someone prefer a synchronized motor over a faster tubular motor?
A

The reasons why a customer would prefer the slower synchronized motor over the tubular is as follows:

  • The synchronized motors are silent. Many consumers prefer that all of their home theater gear operate silently.
  • The synchronized motor consumes considerably less power per operation than a tubular motor making it more of a green-conscious product.
  • Because the synchronized motor is produced at a lower cost than the tubular motor, we can forward the savings on to the consumer by providing a more aggressive price point.
  • Because of its slow speed, the synchronized motor generates less heat allowing it to enjoy a long operational lifespan.
  • Lastly, the synchronized motor has a drop speed that is roughly equal to a projector’s power cycle.
  • ALL EPV® screens use tubular motors.

Q Are EPV® electric screens compatible with Harmony remotes?
A

Yes, EPV® electric screen products are compatible with Harmony and in their database.

Please visit the Harmony website for further assistance with programming your remote with our electric screens.

click here

Q Should I get a 1:1, 4:3, 16:9, 16:10 or 2.35:1 format screen?
A

It depends entirely what your intentions are but here are the general format uses to help you out.

1) 1:1 format: If you use traditional Slideshow/OHP (Overhead Projector), Document Camera, and commercial projector presentations. These are most commonly used in schools, government facilities, and houses of worship.

2) 4:3 NTSC format: PC software, Commercial Presentations (if your projector is SVGA or XGA native resolution), Classroom Training, and Gaming.

3) 16:9 HDTV format: Home Theater Movies and Gaming

4) 16:10 format: PC software, video games, video editing, presentations from notebooks with WXGA or WUGA native output.

5) 2.35:1 Cinemascope format: Strictly Home Theater movies.

Q What size of screen should I get for my room?
A

The best way to do it is to make sure the screen’s diagonal size matches the distance to you first row of seating. There are no set standard sizes for a room; however, consider the seating location of you and your guests. The screen should allow everyone to comfortably sit and watch without craning their necks back or shifting their eyes from side to side. Generally, 84″ – 106″ diagonal sizes are appropriate for your typical residential setup.

Q What would be a good screen for my home theater room if I was planning on using it for regular TV and not just movies?
A

Although the sky’s the limit when it comes to getting a home theater projector, there are 3 basic qualities that define the typical mainstream consumer product.

1. Price point is at or below $4,000 USD

2. Your Projector’s Contrast Ratio is higher than 2500:1

3. Your Projector has a 16:9 (HDTV) Native Aspect Ratio

Matte White is the most widely used material because of its superior versatility and it is recommended over high gain or contrast gray surfaces. It has wide diffusion uniformity for maximum visibility and will get satisfactory results with virtually any front projection array. It is recommended over high-gain material because high-gain concentrates the diffusion into a narrow viewing cone with sharp color enhancement which is great for a dedicated home theater environment but not preferred for a multi-purpose room due to its limited visibility angle. Contrast gray material enhances black level contrast for older DLP and entry level LCD projectors but also does this at the expense of diminished light return which means it should be used only with high output projectors.

Front projection should generally be used in a setting with controlled lighting or no ambient light at all.

Q I have a 16:9 (HDTV) home theater projector but I’d like to have a presentation that has a 2.35:1 (Cinemascope) aspect ratio on a 2.35:1 projection screen. Do I need an anamorphic lens for this?
A

For the best possible results, an anamorphic lens is recommended. However, it is possible to get a 2.35:1 screen format as long as you can live with the “black bars” created when a mismatched 16:9 native aspect ratio projector is set up to fit a wider projection screen format. It is simply a matter of personal preference.

Q How to adjust the DROP/RISE of all EPV® Electric Screens
A

Here are the instructions on how to adjust the rise and drop of your EPV® electric screen.

Please click on your screens’ series from the following list below.

Q Can I use the AcousticPro 4K material in a room with ambient light?
A The AcousticPro 4K performs at its best in a light controlled environment, not in a room that will have ambient light. The material is a fabric with a special weave pattern for projection use.
It is suggested to go with our standard CineWhite® 2 material if a matte white screen is needed. Or better yet, our very best ISF Certified ChromaWhite material will perform better with 1.25 gain and accurate color fidelity.

FAQ Topics

How to Choose the Correct Projection Screen

Q Will your space be configured as a dedicated home theater or a mixed use media room? How do you choose between a fixed or electric frame?
A

Fixed Frames are typically used in a dedicated home theater room or in rooms that have the space that allows a screen to be on permanent display. Because of their relative low cost and ease installation, fixed frame projection screens are most commonly used in media rooms.

Q I just got a good deal on a SVGA Projector with a contrast ratio 2500:1. It gets good quality in a 100″ image on a white wall so I am planning to get a screen without spending too much. What should I buy?
A

Many people are using SVGA Projectors for videos and gaming with good results. Here are some ideas for selecting your Projection Screen.

Step 1: Choose a screen that is somewhere between the $100 to $400 price point (excluding size factors). As a rule of thumb, try to keep the cost of your screen to about 30% of your projector’s cost for the sake of proportional spending.

Step 2: Choose a 4:3 or 16:9 format screen, depending on how much time you will be involved with TV, gaming or movies that have various formats from 4:3, 16:9, and 2.35:1.

Step 3: MaxWhite® FG or CineWhite® 2 is the best choice for you. But you may also consider a high contrast gray material to improve your black levels if you are watching presentation with an SVGA projector with a low contrast ratio at about 2000:1 with a high output that exceeds 1500 lumens. Contrast gray is primarily used to improve black levels but the diminished light return should always be considered.

Q What type of content do you watch the most: Television or DVDs? Do you watch in native HD widescreen (16:9) or cinematic wide (2.35:1)?
A

If you plan on watching high-definition television more than movies, you should plan on getting a 16:9 screen, which is the native aspect ratio of most projectors for home theater.

If you are more the proverbial movie buff, then you might consider a 2:35 to 1 widescreen, which is the aspect ratio of most Blu-ray discs. If you go with 2:35:1 screen, you’ll need a projector or video source that can handle the different aspect ratios by maintaining a constant height on the screen, or use a panamorphic lens.

Q Where will the front speakers be placed in a theater/screen set up? How do you pick between standard or acoustic transparent screen?
A

Most home theater rooms allow the speaker placement below and to the sides of a screen. This allows you to choose a screen for the best video versus speaker placement.

If you have to (or choose to for aesthetic reasons) place speakers behind the screen you will need to choose an acoustic transparent screen, otherwise you can experience light loss and compromised image quality.

Acoustic Transparent screens, like EPV®’s award-winning AcousticProA4K, have an extremely tight weave and zero moire (rainbow artifact) performance that brings near-matte white performance.

Q How far do I plan on sitting from the screen? How do I pick a screen size?
A

The seating area distance from the screen is the key question for choosing what size screen you can put in the room. Most people are most comfortable viewing images from about 1.5 to 2 times the screen width.

The most common mistake we see in choosing a size screen is that there is a tendency to choose too big a screen for the room.

Q How much light control do I have? How do I choose between different screen options?
A

If you have good light control in a room or will be typically using the screen in a dark setting or at night, a 1.0-1.1 gain, matte white screen is a good choice.

If you prefer to use your screen in brighter environments with more ambient light, you will want to look for a higher gain screen, such as a gray screen to boost contrast levels or even select an ambient light rejecting screen, which offers excellent performance in even daytime ambient conditions

Q What’s the budget? How much should I spend?
A

Elite Prime Vision® offers a screen for virtually every application and in enough options to satisfy all viewing preferences. EPV®’s screens are also priced to be among the most competitive screens in the industry. Whether you want fixed-frame, motorized, curved and application screens, EPV® has one that will fit your room and your budget.

We offer the best frames (3.5” thick aluminum, heavy velvet-coated), best screen materials, robust, tubular motors on the electric product and an industry best limited-lifetime/5-year warranty respectively on the fixed-frames and motorized screens.